About the Trust


Work on the overhaul of 5025 began at the beginning of 2012. This was thanks to grants or promises of support from the Strathspey Railway Company, the Strathspey Railway Trust, the Heritage Lottery Fund the Strathspey Railway Association and the significant amount which had already been raised from our supporters though appeals.

Major progress has been made on the locomotive and tender frames, axleboxes, motion, dragboxes and valve gear at Aviemore and on the major rebuild of the boiler, reprofiling of the tyres of the locomotive and tender wheels and construction of a new tender tank at Riley Engineering of Bury. Work has also included the casting and machining of a pair of new cylinders

The WEC Watkinson Trust originally hoped to return 5025 to service in 2015, however owing to the amount of work needed, a more realistic aim is for completion is towards the middle of 2018.

To achieve this further donations to the WEC Watkinson Trust will be welcomed by our treasurer: WAD Macphail CA, ‘Ardneil’, 80 Bruceland Road, Elgin, Moray, IV30 1SP.








Saturday, 27 May 2017

27th May 2017

Riveting in progress
Benny heating the rivets.


Having placed the rivet in its hole, Benny withdraws,  Tom holds the dolly on the back, whilst Nathan uses the gun to form the rivet head.


Nearly there, Nathan finishes the head of the rivet, Benny is already heating the next rivet.


The front crossmember riveted into its place behind the front bumper.


Another view looking forward.


Running plate support angles.


The finished left hand front buffer beam supports.


The right hand side with one difficult rivet to go.


The front apron plate is now in position, along with the vacuum pipe bracket.


Another view slightly angled


Next the front running board has been bolted into place ready for riveting.


On the right hand side the running plate supports can be seen.


Away from the riveting, these are the front bogie lubricating pipe connections.  The smaller right hand threaded part is a new piece which has been welded to the original to form a repair.


No comments:

Post a Comment